Goop Coat-It Epoxy Sealer with Kevlar
This item is a shipping hazard and can only ship via ground delivery within the continental United States.
Goop Coat-It Epoxy Sealer with Kevlar is a waterproof epoxy sealer for aluminum, steel, fiberglass, wood, and concrete. You can apply this sealer with a brush, roller, or squeegee. The ten mils prime coat is flexible and non-shrinking in one application. It has a pot life of 30 minutes. Cure time: 10 hours @ 70°F. Use above or below the waterline. Use with or without fiberglass reinforcement. It can coat leaky ponds (cement or fiberglass) and creates a hard black surface that is scratch-resistant and durable.
• 2 lb kit covers approximately 20 sq ft.
• 8 lb kit covers approximately 80 sq ft.
|
Physical Properties
|
|
|
Heat deflection temperature:
|
116ºF (ASTM D648-264 psi)
|
|
Bond strength:
|
2,020 psi (mild steel)
|
|
Flexural strength:
|
8,460 psi
|
|
Flexural modulus:
|
319,000 psi
|
|
Tensile strength:
|
6,180 psi
|
|
Tensile modulus:
|
45,000 psi
|
|
Elongation
|
1.35%
|
|
Barcol hardness (GYZI-935):
|
79
|
Click here for Fiberglass Resin Comparison Chart.