How to Build a Box with Plastic
How to Build a Basic Acrylic Box: A Step-by-Step Guide
Plastic is a fantastic material for creating a variety of projects, from display cases and screen protectors to computer enclosures, artwork, and even robotics. One practical application is a custom-made acrylic organizer that fits perfectly inside a drawer. The great news? You can build projects like these yourself with minimal tools! This guide will walk you through constructing a basic five-sided acrylic box using simple techniques.
What You'll Need
-
Acrylic Sheets (1/4-inch acrylic recommended for ease of use)
-
Table Saw (10-inch, 60-tooth carbide-tipped blade recommended)
-
Router (Optional) (for smooth edges before gluing)
-
Applicator
-
Protective Masking Tape
-
MAPP Gas Torch (for polishing edges)
-
Brillianize Cleaner (for finishing touch)
Step 1: Determine Dimensions & Cut List
For this guide, we'll build a 10-inch x 10-inch x 10-inch box. The cutting dimensions are as follows:
-
Top piece: 10" x 10"
-
Two outside side pieces: 10" x 9 3/4"
-
Two inside side pieces: 9 1/2" x 9 3/4"
Since the side pieces sit on top of the base, we subtract 1/4-inch thickness where necessary to ensure proper fitting.
Pro Tip: TAP Plastics offers free cutting services, so you can get the exact dimensions you need without extra effort.
Step 2: Cutting the Acrylic
If cutting the acrylic yourself, use a table saw with a sharp blade to ensure smooth, chip-free edges. Check out TAP Plastics’ video on how to cut plastic sheets for more details.
Optional: Routing the edges before gluing improves the final appearance but is not mandatory.
Step 3: Preparing for Gluing
-
Remove the protective masking from the areas that will be glued.
-
Lay one of the larger side pieces flat on your work surface.
-
Place an inside side piece against it at a 90° angle, flush with the edge.
Step 4: Gluing the Pieces
We’ll use a basic glue-in-place method for simplicity. (A more advanced method involves leaving a slight overhang and routing the edges flush after assembly.)
-
Apply acrylic glue with an applicator to the joint between the two side pieces.
-
Hold the pieces steady for a few minutes until the glue sets. Small air bubbles in the joint are normal.
-
Repeat for the opposite side.
-
Allow the glued pieces to set for at least 20 minutes.
-
Carefully invert the structure and glue it to the fourth side.
-
Let dry for another 20 minutes.
-
Finally, attach the four sides to the top piece and apply glue.
-
Allow the assembled box to cure for 24 hours.
Step 5: Finishing Touches
-
Polish the Edges: Use a MAPP gas torch to give the edges a polished look.
-
Clean the Box: Wipe the surface with Brillianize cleaner for a pristine finish.
-
Admire Your Work! You’ve just built a functional, custom acrylic box!
Final Thoughts
This method provides a simple yet effective way to build an acrylic box, perfect for organizers, display cases, and more. Once you master this technique, you can expand your skills to create more complex acrylic projects for home and office use. Happy building!
What does TAP do?
<p><strong>Discover What TAP Plastics Can Do for You</strong></p> <p>At TAP Plastics, one of the most common questions we receive is: <em>Wha
TAP Plastics Store Tour
<p><strong>Explore TAP Plastics: A Retail Store Tour</strong></p> <p>Welcome to TAP Plastics! If you’ve ever wondered what we sell, you’re in f
TAP DIY: Custom AC Vent Window Adapters
<h1>Custom AC Vent Window Adapters – Get the Perfect Fit at TAP Plastics</h1> <p>Summer is coming, and if you don’t have central air conditioning, a portab
How To Make Fiberglass Part - Part 2
<p><strong>How to Make a Fiberglass Part from a Mold</strong></p> <p>Creating a fiberglass part from a mold requires careful preparation, applicati
How To Make Fiberglass Part - Part 1
<h1>How to Make a Fiberglass Mold: Step-by-Step Guide (Part 1)</h1> <p>Fiberglass molding is a great technique for duplicating parts, such as a boat hull. This
How To Repair Wood with Fiberglass
<p><strong>Quick and Invisible Wood Repair: A Step-by-Step Guide</strong></p> <p>Wood repairs, whether indoors or outdoors, can be quick, seamless,
How to Cut Plastic Sheets
<p><strong>How to Cut Plastic Sheets: A Guide for DIYers and Professionals</strong></p> <p>The best way to cut plastic sheets, like acrylic plexigl
How to Make a Latex Mold
<p><strong>How to Make a Simple Latex Mold with TAP Premium Liquid Latex Rubber (NOTICE: TAP Premium Liquid Latex Rubber has been DISCONTINUED)</strong></p>
How to Make a Urethane Mold
<p><strong>How to Make a Simple Urethane Mold</strong></p> <p>Urethane molding is an effective way to create simple block molds for casting resins,
How to Make a Simple Silicone Mold Part 1
<p><strong>How to Work with TAP Silicone RTV System: A Step-by-Step Guide - Part 1</strong> (<a href="https://www.tapplastics.com/product_info/videos/how_
How to Make a Simple Silicone Mold Part 2
<p><strong>How to Mix and Pour <a href="https://www.tapplastics.com/product/mold_making_materials/mold_making_supplies/tap_silicone_rtv_mold_making_system/61&qu
How to Build a Box with Plastic
<p><strong>How to Build a Basic Acrylic Box: A Step-by-Step Guide</strong></p> <p>Plastic is a fantastic material for creating a variety of project
How to Make a Two-Part Mold
<p><strong>How to Make a Simple Two-Part Mold Using Urethane RTV Rubber</strong></p> <p>Creating a two-part mold is essential for capturing the det
How to Build a Mold Box
<p><strong>How to Make Mold Boxes for Urethane and Silicone RTV Molds</strong></p> <p><a href="https://www.tapplastics.com/product/mold_mak
How to Make Jewels, Gems, Crystals, and Pendants
<p><strong>How to Make Your Own Jewelry, Gems, and Crystals with Casting Resin</strong></p> <p>Creating your own custom jewels, gems, crystals, and
How to make a Resin Table Top Part 1
<p><strong>How to Create a Custom Resin Tabletop with Embedded Designs</strong></p> <p>Nothing matches the beauty of a crystal-clear resin tabletop
How to Make a Resin Table Top Part 2
<a href="https://www.tapplastics.com/product_info/videos/how_to_make_a_resin_table_top_part_1">Click here</a> to see Part 1. <p> </p>
How to use Envirotex Lite and Ultra-Seal
<p><strong>Guide to Using Ultra-Glo and Ultra-Seal</strong></p> <h3>Introduction</h3> <p>This guide provides step-by-step instructio
How To Glue Acrylic
<p><strong>A Beginner's Guide to Gluing Acrylic: Tips and Techniques</strong></p> <p>Gluing acrylic is a unique process that differs significantly
How to Bend Plastic
<p><strong>A Complete Guide to Bending Plastic with a Strip Heater</strong></p> <p>Bending plastic is an essential technique for many DIY and profe
How to build a Plastic Heat Bender
<p><strong>How to Build and Use a DIY Plastic Line Bender</strong></p> <p>Bending plastic sheets at home is made easy with a DIY line bender. This
How to Polish and Repair Scratched Plastic
<p><strong>How to Polish and Maintain Plastic for a Sparkling Finish</strong></p> <p>Plastic is a beautiful and decorative material, known for its
How to Polish and Shape Plastic Edges
<p><strong>Acrylic Edge Finishing Techniques</strong></p> <p>Acrylic plastic can be incredibly beautiful, especially when its edges are properly pr
How to Repair Scratched CDs, DVDs, iPods and more
<p><strong>How to Restore Scratched Plastics with the Novus Polish System</strong></p> <p>Scratched plastic surfaces can be frustrating, but you do
How to Protect Your LCD or LED TV
<p><strong>Protect Your LCD and DLP TV Screens with a Custom Screen Protector</strong></p> <p>LCD TVs, DLP TVs, and LCD computer monitors have soft
Fiberglass Repair Guide
<p><strong>Fiberglass Repair Guide</strong></p> <p>This guide provides a step-by-step demonstration of a simple fiberglass repair. The methods outl
How to Repair Gelcoat Part 1
<p><strong>How to Perform a Simple Non-Structural Gel Coat Repair</strong></p> <p>Gel coat is a protective outer layer applied to fiberglass surfac
How to repair Gelcoat Part 2
<p><strong>How to Apply and Finish Gel Coat for Fiberglass Repair (</strong><a href="https://www.tapplastics.com/product_info/videos/how_to_repair_gelcoat
How to Waterproof with Coat-It
<p><strong>How to Create a Tough, Waterproof Coating with Coat-It</strong></p> <p>Creating a durable, waterproof coating requires the right materia
How to Apply Vinyl Graphics
<p><strong>How to Install Self-Adhesive Vinyl Graphics for a Professional Finish</strong></p> <p>Self-adhesive vinyl graphics are an affordable and
How to Select Window Film
<p><strong>A Comprehensive Guide to Choosing the Right Window Film</strong></p> <p>Window film can offer tremendous benefits to your home or busine
How To Install Window Film
<p><strong>How to Install Window Film Like a Pro</strong></p> <p>Installing window film in your home or business is an excellent way to achieve pro
Cosplay DIY Supplies
<p><strong>The Ultimate Cosplay Materials Guide from TAP Plastics</strong></p> <p>Bringing your cosplay dreams to life requires the right materials
TAP InstaShape Video Demo
<h1><strong>How to Use TAP Insta Shape: A Versatile Moldable Plastic for DIY & Cosplay</strong></h1> <p>TAP Insta Shape is a moldable therm
Plastic Containers at TAP Plastics
<h1>Find the Perfect Container for Every Need at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of <strong>containers</strong> designed fo
Display Items at TAP
<h1><strong>Custom & Ready-Made Display Cases, Stands, and Boxes – TAP Plastics</strong></h1> <p>Looking for the perfect way to showcase
Fiberglass Roller
<p><strong>A Guide to Fiberglassing with Rollers</strong></p> <p>Fiberglassing with rollers is an efficient way to create strong, lightweight, and
Guide to Rod Stock and Shapes at TAP Plastics
<p><strong>Guide to Rod Stock and Shapes at TAP Plastics</strong></p> <p><a href="https://www.tapplastics.com/product/plastics/plastic_rods
Tubing Options at TAP Plastics
<p><strong>A Guide to Tubing Options at TAP Plastics</strong></p> <p>TAP Plastics carries a wide variety of tubing options for different applicatio
Plastic Materials on Rolls at TAP Plastics
<h1>A Guide to Plastic Materials on Rolls at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of plastic materials on rolls, available by the foot, yard
Trade Show Essentials at TAP Plastics
<h1>Enhance Your Trade Show Display with TAP Plastics</h1> <p>A successful trade show display captures attention, showcases your brand, and leaves a lasting im
How to Work with Worbla
<h1><strong>Worbla: The Ultimate Thermoplastic for Cosplay, Crafting, and Model Making</strong></h1> <p>Worbla is a <strong>non-toxic thermop
Picture Frames and Display Holders
<h1><strong>Picture Frames & Display Holders at TAP Plastics</strong></h1> <p>TAP Plastics offers a wide variety of <strong>picture f
Adhesive Glues and Tapes
<p><strong>Your Guide to Choosing the Right Adhesive and Tape at TAP Plastics</strong></p> <p>When it comes to bonding different materials, choosin
Literature Holders at TAP Plastics
<p><strong>A Guide to Literature Holders from TAP Plastics</strong></p> <p>When it comes to organizing and displaying literature in a professional
Three Dimensional Signage with the Quick Snap System
<p><strong>How to Create Professional 3D Signs with the Quick Snap Letter System</strong></p> <p>Three-dimensional signs add depth and visual impac
The Basics of Fiberglass Fabric
<p><strong>A Comprehensive Guide to Fiberglass Fabric: Choosing the Right Reinforcement</strong></p> <h3>Introduction</h3> <p>Fiberg
Picture Framing Options at TAP Plastics
<p><strong>A Guide to Picture Framing Options at TAP Plastics</strong></p> <p>Framing pictures, posters, or menus doesn’t have to be limited to t
Introduction to Mold Making
<p><strong>A Guide to Choosing the Right Flexible Mold Material from TAP Plastics</strong></p> <p>When creating molds for casting, selecting the ri
Introduction to TAP Platinum Silicone
<p><strong>The Ultimate Guide to Mold Making with TAP Platinum Silicone</strong></p> <p>Mold making has never been easier with <a href="htt
